Enter the following commands. cdcurl -O https://www.clearskyinstitute.com/ham/HamClock/install-hc-rpichmod u+x install-hc-rpi./install-hc-rpi Click y (yes) to proceed and hit enter. This may seem to stall during the installation of necessary helper packages, but it is merely taking a long time to finish. Once the helper packages have been installed, you will be prompted to indicate whether you wish to build solely for web […]
Ham
4 posts
This radio is capable of 3 different frequency modes. You have Ham Radio Frequency Mode, GMRS Frequency Mode and Frequency unlocked mode. To select a mode you just need to do has follows, in all these instances we will have the radio turned off, this will reset your device: To select Ham Radio Frequency Mode, You need to press the […]
To unlock the full frequency bands on the Retivis RT85 foll the instructions below. First you need to enable frequency mode with memory mode, their are 2 possible ways to enable this. First,turnthe radio off normally. Then,press”F” and”1”key at the same time and turn on it. Now,press”#”key,it will enter and display VFO mode. Input frequency to check whether VFO works. […]
Q Codes QRA – What is the name of your station QRB – How far, approximately, are you from my station QRC – What authority/administration settles the accounts of your station QRD – Where are you bound and where are you from QRE – What is your estimated time of arrival at …(place) QRF – Are you returning to …(place) […]